Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 626
perfCfgSave, perfCfgClear, perfCfgRestore
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 626 highlights
2 perfCfgSave perfCfgSave Saves performance monitoring configuration settings to nonvolatile memory. SYNOPSIS perfcfgsave DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to save the current Performance Monitor configuration for end-to-end (EE) performance monitors to nonvolatile memory. Configuration changes are saved persistently across power cycles. The number of monitors that can be saved to flash memory is limited as follows: • 16 EE monitors per port • A total number of 512 EE monitors per switch When the number of monitors per port or switch exceeds the limit, the following message is displayed: "Performance monitor count has exceeded limit. Some monitors have been discarded." This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. Monitors created by Web Tools are not saved in persistent memory. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To save the current performance monitoring configuration to firmware: switch:admin> perfcfgsave This will overwrite previously saved Performance Monitoring settings in FLASH. Do you want to continue? (yes, y, no, n): [no] y Please wait ... Performance monitoring configuration saved in FLASH. perfCfgClear, perfCfgRestore 598 Fabric OS Command Reference 53-1002746-01