Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 758
portcmd --traceroute 8/xge0, portcmd --ipperf 8/ge0
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 758 highlights
2 portCmd To verify if packets can be sent to the destination IP address using VLAN tagging with the -c option. switch:admin> portcmd --ping 8/ge0 \ -s 192.168.10.1 -d 192.168.20.1 -v 10 -c 3 To trace the IP router hops used to reach the remote host using VLAN tagging with the -c option. switch:admin> portcmd --traceroute 8/ge0 \ -s 192.168.10.1 -d 192.168.20.1 -v 10 To ping a failover crossport: switch:admin> portcmd --ping 8/xge0 \ 192.168.11.20 -d 1.1.1.1 -x To trace the route to a failover crossport: switch:admin> portcmd --traceroute 8/xge0 \ 192.168.11.20 -d 1.1.1.1 -x To set the path characteristic to source mode on the remote host using VLAN tagging with the -c option. switch:admin> portcmd --ipperf 8/ge0 \ -s 192.168.10.1 -d 192.168.20.1 -S -v 10 -c 3 To create a TPerf data sink on VE_Port 16: switch:admin> portcmd --tperf 16 -sink TPerf has been configured successfully for 16 TPerf is servicing requests on 16 priority: high TPerf is servicing requests on 16 priority: medium TPerf is servicing requests on 16 priority: low Tperf data source can now be started To configure a Brocade FX8-24 blade as a TPerf data source (this example generates round-trip high, medium, and low priority traffic with a fixed PDU size of 2084 bytes. The payload pattern is a jitter pattern and the checksum is checked by the sink): switch:admin> portcmd --tperf 16 -source \ -size 2048 -pattern 5 TPerf has been configured successfully for 16 TPerf is generating traffic on 16 priority: medium Tunnel ID: 16 High Priority Medium Priority Low Priority bytes tx 0 5280520 0 bytes rx 0 407240 0 PDUs tx 0 10183 0 PDUs rx 0 10182 0 out of seq PDUs rx 0 0 0 flow control count 0 0 0 last rtt 0 5 0 730 Fabric OS Command Reference 53-1002746-01