Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 72
agAutoMapBalance, SYNOPSIS, DESCRIPTION, NOTES, OPERANDS
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
2 agAutoMapBalance agAutoMapBalance Controls automatic remapping of F_Ports in AG mode. SYNOPSIS agautomapbalance --enable [-fport | -nport] [-pg Port_Group_Number | -all] agautomapbalance --disable [-fport | -nport] [-pg Port_Group_Number | -all] agautomapbalance --force agautomapbalance --show agautomapbalance --help DESCRIPTION NOTES OPERANDS Use this command to control the automatic rebalancing of F_Ports for login distribution in the event that an F_Port goes offline or an N_Port comes online. If automatic rebalancing is enabled, and an F_Port goes offline, the remaining F_Port logins are redistributed across the existing N_Ports. Similarly if a new N_Port comes online, some of the F_Port logins being routed through existing N_Ports would be failed over to the new N_Ports. Both operations are potentially disruptive. Disabling automatic rebalancing of login distribution provides a way of avoiding disruptions associated with routine F_Port/N_Port offline/online events. The default values for agautomapbalance are as follows: • Disable automatic login redistribution when F_Ports go offline. • Enable automatic login redistribution when N_Ports come online. Use the --show option to display the current configuration of the automatic rebalancing feature. The command output varies depending on current AG policy settings: • If Port Group Policy is enabled on the switch, the command displays the following information for each configured port group: - PG_ID - Port Group number - LB mode - Login Balancing mode: enabled or disabled - nport - Enabled or disabled - fport- Enabled or disabled • If Auto Policy is enabled on the switch, the command displays the status of the automatic rebalancing feature per port type as either disabled or enabled. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --enable Enables automatic login redistribution upon removal or addition of a specified port type. -fport Enables automatic login redistribution in the event that one or more F_Ports go offline. When automatic login redistribution is enabled, the remaining F_Ports are remapped such that logins are balanced among the existing Imports. 44 Fabric OS Command Reference 53-1002746-01