Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 133
cfgCreate
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
cfgCreate 2 cfgCreate Creates a zone configuration. SYNOPSIS cfgcreate "cfgName", "member[;member...]" DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to create a new zone configuration. This command changes the Defined Configuration (see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Refer to the zoneCreate command for more information on name and member specifications. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The following operands are required: "cfgName" Specify a name for the zone configuration in double quotation marks. A zone configuration name must begin with a letter followed by any number of letters, numbers, and underscores. Names are case-sensitive. For example, "Cfg_1" and "cfg_1" are different zone configurations. Blank spaces are ignored. "member" Specify a zone member or list of zone members to be added to the configuration. The list must be enclosed in double quotation marks. Members must be separated by semicolons. The zone configuration member list must have at least one member. Empty member lists are not allowed. To create a configuration containing three zones: switch:admin> cfgcreate "USA_cfg", \ "Purple_zone;Blue_zone;Green_zone" cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow Fabric OS Command Reference 105 53-1002746-01