Dell Force10 S25N-S50N Installing S25N and S25V Systems - Page 15
Site Preparation, Site Selection
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 2 Site Preparation This chapter describes requirements and procedures to install your S25N or S25V system, in the following topics: • Site Selection • Cabinet Placement on page 16 • Rack Mounting on page 16 • Fans and Airflow on page 16 • Power on page 17 • Storing Components on page 18 • Tools Required on page 18 For detailed system specifications, refer to Chapter 6, System Specifications, on page 41. Note: Install the system into a rack or cabinet before installing any optional components. Site Selection Make sure that the area where you install the system meets the following safety requirements: • Near an adequate power source. Connect the system to the appropriate branch circuit protection as defined by your local electrical codes. • Ambient temperature between 32° - 122°F (0° - 50°C). • Relative humidity that does not exceed 85% non-condensing. • In a dry, clean, well-ventilated, and temperature-controlled room, away from heat sources such as hot air vents or direct sunlight. • Away from sources of severe electromagnetic noise. • Positioned in a rack, cabinet, or on a desktop with adequate space in the front, rear, and sides of the unit for proper ventilation, and access. Installing S25N and S25V Systems 15