Dell Force10 Z9000 Installing the Z9000 System - Page 13
The Z9000 system LEDs are, System reset Reset
View all Dell Force10 Z9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
The Z9000 system LEDs are: • System status (SYS) • Power status (PSU) • Alarm status (ALM) • System locator beacon (LOC) • System reset (Reset) Table 2-3. System LED Displays Label LED Color/Display System status (SYS) Located on I/O panel Power status (PSU0, PSU1) Located on I/O panel Alarm status (ALM) Located on I/O panel System locator (LOC) Located on I/O panel Off Green solid Amber solid Green solid Amber solid Off Amber solid Red solid Off Blue solid Description No power Normal operation Error during boot-up Normal operation Power supply missing or failed No alarm Minor alarm Critical alarm No activity System beacon/locator As shown in the following figure, the Z9000 includes status indicator LEDs for each port. These ports are described in Table 2-4. When the QSFP+ ports are operating in 40G mode, the left-most LED for the port is lit. When the ports are operating in 4x10G mode, only the LEDs associated with an active port are lit. Figure 2-4. Port LEDs Management port LEDs QSFP+ port LEDs The Z9000 System | 13