Dell Force10 Z9000 Installing the Z9000 System - Page 20
Install the System into the Rack or Cabinet
View all Dell Force10 Z9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
www.dell.com | support.dell.com To attach the brackets to the system, follow these steps: Step Task 1 Take the brackets and screws out of their packaging. 2 Attach the brackets to both sides of the system using four screws for each bracket. Attach the bracket so that the "ear" faces to the outside of the system. View from I/O side View from PSU side Connect to rack/cabinet (ears) Screws Connect to rack/cabinet (ears) Install the System into the Rack or Cabinet Ensure that there is adequate clearance surrounding the rack or within the cabinet to permit access and airflow. To install the system into a two-post 19-inch equipment rack using the already attached mounting brackets, follow these steps: Step Task NOTE: Dell Force10 recommends using one person to hold the Z9000 in place while another person attaches the brackets to the posts. 20 | Install the Z9000