Home » Dell Manuals » Servers » Dell Force10 Z9000 » Manual Viewer

Dell Force10 Z9000 Installing the Z9000 System - Page 41

Specifications, Chassis Physical Design, Environmental Parameters, AC Power Requirements

Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Specifications This chapter contains the following sections: • Chassis Physical Design • Agency Compliance Chassis Physical Design Parameter Height Width Depth Chassis weight Rack clearance required Thermal dissipation Specifications 3.48 inches (8.8 cm) 17.32 inches (44.0 cm) 24.00 inches (61.00 cm) 50.3 lbs (approx.) (22.8 kg) Front: 5-inches (12.7 cm) Rear: 5-inches (12.7 cm) 2692 BTU/h (789 W) Environmental Parameters Parameter Temperature Specifications 32° to 104°F (0° to 40°C) Maximum altitude Relative humidity -40° to 158°F (-20° to 70°C) No performance degradation to 10,000 feet (3,048 meters) 10 to 85% non-condensing AC Power Requirements Parameter Nominal input voltage Maximum AC power supply input current Maximum system power input Specifications 100 to 240 VAC, 50/60 Hz 8.00 A @ 100/120VAC 4.00 A @ 200/240 VAC 789 W 8 Specifications | 41

Section	Page
Preface	7
About this Guide	7
Related Publications	7
The Z9000 System	9
Introduction	9
Orderable Z9000 Components	10
Features	11
Ports	12
System Status	12
LED Displays	12
Site Preparations	15
Site Selection	15
Cabinet Placement	16
Rack Mounting	16
Grounding	16
Fans and Airflow	16
Power	16
Storing Components	17
Install the Z9000	19
Install the Z9000 System in a Rack or Cabinet	19
Attach the Mounting Brackets	19
Install the System into the Rack or Cabinet	20
Attach the Ground Cable	21
Install the QSFP+ Optics	22
Remove the QSFP+ Optics	22
Splitting QSFP Ports to SFP+ Ports	23
Important Points to Know	23
Install the Solid State Drive	23
Remove the Solid State Drive	24
Supply Power and Power Up the System	24
Power Up Sequence	25
AC Power	25
DC Power	25
Power Supplies	27
Components	27
Install a Power Supply	27
Install a New AC Power Supply	28
Install a New DC Power Supply	28
Replace a Power Supply	29
Replace an AC Power Supply	29
Replace a DC Power Supply	30
Fans	31
Components	31
Install a Fan Module	31
Replace a Fan Module	33
Access Ports	35
Access the RJ-45/RS-232 Console Port	35
Access the RJ-45/RS-232 Console Port with a DB-9 Adapter	36
Access the USB-B Console Port	36
Access the Solid State Drive	37
Components	38
Install an SSD	38
View Files on the SSD	38
Copy Files to and from the SSD	39
Remove Files from the SSD	39
Specifications	41
Chassis Physical Design	41
Environmental Parameters	41
AC Power Requirements	41
DC Power Requirements	42
IEEE Standards	42
Agency Compliance	42
USA Federal Communications Commission (FCC) Statement	42
Canadian Department of Communication Statement	43
European Union EMC Directive Conformance Statement	43
Japan: VCCI Compliance for Class A Equipment	43
Korean Certification of Compliance	44
Safety Standards and Compliance Agency Certifications	44
Electromagnetic Compatibility (EMC)	45
Product Recycling and Disposal	45
Battery Replacement	47
For California:	49
Technical Support	51
The iSupport Website	51
Accessing iSupport Services	51
Contacting the Technical Assistance Center	52