Dell Latitude 3190 Owners Manual - Page 23
Installing base cover, Battery, Lithium-ion battery precautions, Removing battery
View all Dell Latitude 3190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing base cover 1. Place the base cover to align with the screw holders on the system. 2. Press the edges of the cover until it clicks into place. 3. Replace the 7 M2.5x7 screws to secure the base cover to the computer. 4. Follow the procedure in After working inside your computer. Battery Lithium-ion battery precautions CAUTION: • Exercise caution when handling Lithium-ion batteries. • Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting the AC adapter from the system to allow the battery to drain. • Do not crush, drop, mutilate, or penetrate the battery with foreign objects. • Do not expose the battery to high temperatures, or disassemble battery packs and cells. • Do not apply pressure to the surface of the battery. • Do not bend the battery. • Do not use tools of any kind to pry on or against the battery. • Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or damage to the battery and other system components. • If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for assistance. See www.dell.com/contactdell. • Always purchase genuine batteries from www.dell.com or authorized Dell partners and resellers. Removing battery 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover 3. To remove the battery: a) Disconnect the battery cable from the connector on the system board [1]. b) Remove the three M2x3 screws that secure the battery to the computer [2]. c) Peel off the adhesive tape that secures the battery to the system [3]. d) slightly hold the tape and lift the battery to release it from the adhesive beneath it [4]. Disassembly and reassembly 23