Dell MX9116n EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 1372

queue qos-group Configures a dot1p traffic class to a queue. Syntax Parameters queue number [qos-group dot1p-values] ● queue number - Enter the traffic single value queue ID, from 0 to 7. ● qos-group dot1p-values - (Optional) Enter either single, comma-delimited, or a hyphenated range of dot1p values, from 0 to 7. Default Command Mode Usage Information Example 0 TRUST-MAP If the trust map does not define traffic class values to a queue, those flows map to the default queue 0. If some of the traffic class values are already mapped to an existing queue, you see an error. The no version of this command returns the value to the default. OS10(conf-tmap-tc-queue-qos)# queue 2 qos-group 5 Supported Releases 10.3.0E or later queue qos-group (Z9332F-ON) Configure mapping for different traffic class types to different queues. Syntax Parameters queue number qos-group traffic-class-numbertype {unicast | multicast} ● queue number - Enter the traffic single value queue ID, from 0 to 7. Multicast Queue ranges from 0 to 2. ● qos-group traffic-class-number - Enter the traffic class number, either single, commadelimited, or hyphenated-range ● typeunicast | multicast - Select either a unicast or multicast queue type Default Command Mode Usage Information Example NA CONFIGURATION (config-qos-map) The command applies to Z9332F-ON. The no version of this command returns the value to the default. OS10(config-qos-map)# queue 2 qos-group 2-5 type unicast Supported Releases 10.5.0 or later random-detect (interface) Assigns a WRED profile to the specified interface. Syntax Parameters Default Command Mode Usage Information random-detect wred-profile wred-profile - Enter the name of an existing WRED profile. Not configured INTERFACE The no version of this command removes the WRED profile from the interface. 1372 Quality of service