Dell MX9116n EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 154

clock timezone Configures the standard or user-defined time zone that OS10 applies on top of the system clock. Syntax Parameters clock timezone {standard-timezone standard-timezone-name | {timezone-string hours minutes}} ● standard-timezone-name - Enter the standard time zone name that is supported in Linux. To view a list of supported standard time zone names, see the Time zones and UTC offset reference section. ● timezone-string - Enter the name of the time zone. ● hours - Enter the hour offset from UTC, ranging from -23 to 23. ● minutes - Enter the minute offset from UTC, ranging from 0 to 59. Default Command Mode Usage Information Not configured CONFIGURATION The standard time zone option applies the predefined offset for the selected standard time zone, including DST changes that apply to the local time. After you configure this command, OS10 uses the updated local time in all logs and timestamps. You can use the ? character or press the tab key for command completion and view a list of supported standard time zones. To view a list of supported standard time zone names, see the Time zones and UTC offset reference section. Define region names with a "/" at the end of the string. The "/" character indicates that a time zone string follows the region name. For example, "Asia/Calcutta." The no form of the command resets the local time to UTC. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. Example OS10(config)# clock timezone standard-timezone Brazil/West Supported Releases 10.3.0E or later show clock Displays the current system clock settings. Syntax Parameters Default Command Mode Usage Information show clock None Not configured EXEC The universal time coordinated (UTC) value is the number of hours that your time zone is later or earlier than UTC/Greenwich mean time. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. Example OS10# show clock 2017-01-25T11:00:31.68-08:00 Supported Releases 10.2.1E or later show clock timezone Displays the time zone that is configured in the system. Syntax show clock timezone 154 System management