Dell MX9116n EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 672

Supported Releases Non-default VRF OS10(config-router-bgp-100)# vrf blue OS10(config-router-bgp-100-vrf)# address-family ipv4 unicast OS10(configure-router-bgpv4-vrf-af)# distance bgp 21 200 200 OS10(config-router-bgp-100-vrf)# address-family ipv6 unicast OS10(configure-router-bgpv6-vrf-af)# distance bgp 21 201 250 10.4.2.0 or later distribute-list Distributes BGP information through an established prefix list. Syntax Parameters distribute-list prefix-list-name {in | out} ● prefix-list-name-Enter the name of established prefix list. ● in-Enter to distribute inbound traffic. ● out-Enter to distribute outbound traffic. Defaults None Command Modes ROUTER-BGP-NEIGHBOR-AF ROUTER-TEMPLATE-AF Usage Information Example The no version of this command removes the route-map. OS10(conf-router-neighbor)# address-family ipv4 unicast OS10(conf-router-bgp-neighbor-af)# distribute-list inbgg in Supported Releases OS10(conf-router-template)# address-family ipv4 unicast OS10(conf-router-bgp-template-af)# distribute-list outbgg out 10.4.1.0 or later bgp default local-preference Changes the default local preference value for routes exchanged between internal BGP peers. Syntax Parameters Default Command Mode Usage Information Example default local-preference number number - Enter a number to assign to routes as the degree of preference for those routes. When routes compare, the route with the higher degree of preference or the local preference value is most preferred, from 1 to 4294967295. 100 ROUTER-BGP All routers apply this command setting within the AS. The no version of this command deletes local preference value. OS10(conf-router-bgp-1)# default local-preference 200 Supported Releases 10.3.0E or later 672 Layer 3