Dell OptiPlex 3011 AIO Owner's Manual - Page 10
Removing the Stand Cover, Removing the VESA Stand, Before Working Inside Your Computer - installing memory
View all Dell OptiPlex 3011 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. heat sink 6. memory 7. system board 8. coin-cell battery 9. speaker 10. WLAN card slot 11. hard drive 12. communication port 13. power switch 14. chassis Removing the Stand Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Place the computer on a flat surface, display side facing downwards. 3. Press the tab in to release the stand cover and remove it from the computer. Installing the Stand Cover 1. Slide the stand cover into its place and press to secure it to the computer. 2. Follow the procedures in After Working Inside Your Computer. Removing the VESA Stand 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the stand cover. 3. Remove the screws that secure the VESA stand to the computer and remove the VESA stand from the computer. 10