Dell OptiPlex 3011 AIO Owner's Manual - Page 54
Beep Codes, Error Messages, Blinking Amber
View all Dell OptiPlex 3011 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Blinking Amber Power LED 3,4 3,5 3,6 3,7 Problem Description The storage device may be faulty. The memory may not be compatible. The system board may be faulty. The memory has been detected but of an invalid configuration. Beep Codes The beep pattern 1-3-2 (1 beep, then 3 beeps, then 2 beeps) indicates that the computer has encountered a memory problem. Occasionally, re-seating the memory modules may fix the beep code errors. Error Messages Message Description Alert! Previous attempts at booting this system have failed at checkpoint [nnnn]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support. The computer failed to complete the boot routine three consecutive times for the same error. Contact Dell and report the checkpoint code (nnnn) to the support technician. System fan failure Possible fan failure CPU fan failure Possible CPU fan failure Hard-disk drive failure Possible hard drive failure during POST. Hard-disk drive read Possible hard drive failure during boot test. failure Keyboard failure A cable or connector may be loose, or the keyboard or keyboard/mouse controller may be faulty. RTC is reset, BIOS Setup default has been loaded. Strike the F1 key to continue, F2 to run the setup utility. RTC Jumper may be wrongly set. No boot device available No bootable partition on the hard drive, a cable or connector is loose, or no bootable device exists. 54