Dell OptiPlex 3011 AIO Owner's Manual - Page 20
Installing the Heat Sink, Removing the System Fan, Installing the System Fan - 20
View all Dell OptiPlex 3011 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing the Heat Sink 1. Place the heat sink on the computer. 2. Tighten the screws to secure the heat sink to the computer. 3. Install: a) system board cover b) back cover c) VESA stand d) stand cover 4. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) stand cover b) VESA stand c) back cover d) system board cover 3. Disconnect and release the system-fan cable from the system board. Remove the screws that secure the system fan to the computer and remove it from the computer. Installing the System Fan 1. Place the system fan on the computer. 2. Guide the system-fan cable through its tab on the computer and connect the cable to the system board. 3. Install: a) system board cover b) back cover c) VESA stand d) stand cover 20