Dell OptiPlex 3011 AIO Owner's Manual - Page 11
Installing the VESA Stand, Removing the Back Cover, After Working Inside Your Computer
View all Dell OptiPlex 3011 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing the VESA Stand 1. Place the VESA stand on the computer. 2. Tighten the screws to secure the VESA stand to the computer. 3. Install: a) stand cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Back Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) stand cover b) VESA stand 3. Using a plastic scribe, release the back cover from the computer. 11
Installing the VESA Stand
1.
Place the VESA stand on the computer.
2.
Tighten the screws to secure the VESA stand to the computer.
3.
Install:
a)
stand cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Back Cover
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
stand cover
b)
VESA stand
3.
Using a plastic scribe, release the back cover from the computer.
11