Dell OptiPlex 3011 AIO Owner's Manual - Page 22
Installing the Intrusion Switch, Removing the Speakers
View all Dell OptiPlex 3011 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing the Intrusion Switch 1. Place the intrusion switch on the computer. 2. Guide the intrusion-switch cables through the tabs on the computer and connect the cable to the system board. 3. Install: a) system fan b) system board cover c) back cover d) VESA stand e) stand cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) stand cover b) VESA stand c) back cover d) system board cover 3. Disconnect the speaker cable from the system board. Remove the screws that secure the speakers to the computer and remove the speakers from the computer. 22
Installing the Intrusion Switch
1.
Place the intrusion switch on the computer.
2.
Guide the intrusion-switch cables through the tabs on the computer and connect the cable to the system board.
3.
Install:
a)
system fan
b)
system board cover
c)
back cover
d)
VESA stand
e)
stand cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speakers
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
stand cover
b)
VESA stand
c)
back cover
d)
system board cover
3.
Disconnect the speaker cable from the system board. Remove the screws that secure the speakers to the
computer and remove the speakers from the computer.
22