Dell OptiPlex 960 Setup and Quick Reference Guide - Page 23

such as a gap between the door and top of the enclosure to allow hot

Get Dell OptiPlex 960 PDF manuals and user guides View all Dell OptiPlex 960 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

• The enclosure should be designed so that the ambient air entering the system meets the operating temperature requirements of the system. The enclosure design should be designed to minimize the temperature increase of the air entering the system by: - Implementing enclosure venting that allows at least 30% airflow (front and back) - Implementing enclosure ventilation that aligns well with the system ventilation to allow direct airflow into the system. This is especially important at the exhaust of the system. - Ensuring that there is ventilation at the highest point of the enclosure (such as a gap between the door and top of the enclosure) to allow hot air to escape. NOTICE: Do not install your computer in an enclosure that does not allow airflow. Restricting the airflow impacts your computer's performance, possibly causing it to overheat. • If your computer is installed in a corner on a desk or under a desk, leave at least 5.1-cm (2-in) clearance from the front of the computer and at least 5.1 cm (2 in) from the back of the computer to the wall to permit the airflow required for proper ventilation. Setting Up Your Computer 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Setting Up Your Computer
23
•
The enclosure should be designed so that the ambient air entering the
system meets the operating temperature requirements of the system. The
enclosure design should be designed to minimize the temperature increase
of the air entering the system by:
–
Implementing enclosure venting that allows at least 30% airflow (front
and back)
–
Implementing enclosure ventilation that aligns well with the system
ventilation to allow direct airflow into the system. This is especially
important at the exhaust of the system.
–
Ensuring that there is ventilation at the highest point of the enclosure
(such as a gap between the door and top of the enclosure) to allow hot
air to escape.
NOTICE:
Do not install your computer in an enclosure that does not allow airflow.
Restricting the airflow impacts your computer’s performance, possibly causing it to
overheat.
•
If your computer is installed in a corner on a desk or under a desk, leave at
least 5.1-cm (2-in) clearance from the front of the computer and at least
5.1 cm (2 in) from the back of the computer to the wall to permit the
airflow required for proper ventilation.