Dell PowerConnect 6024 User's Guide (.htm) - Page 113

Facility-A user-defined application from which system logs are sent to the remote server. Only one facility can be assigned to a single server. If a second facility level is assigned, the first facility level is overridden. All applications defined for a device use the same facility on a server. The possible field values are local 0, local 1, local 2, local 3, local 4, local 5, local 6 and local 7. Description (0-64 characters)-Displays the user-defined server description. Severity to Include-The log severity. Selecting a severity level automatically selects all higher severity levels. Delete Server-When checked, deletes a server from the Available Servers list. The OOB Remote Log Server Settings page also contains a severity list. The severity definitions are the same as the severity definitions on the RAM Log Table on page 138. Sending Logs to an Out-of-Band Log Server 1 Open the OOB Remote Log Server Settings page. 2 Define the UDP Port, Facility, and Description fields. 3 Select the log type and log severity. 4 Click Apply Changes. The log settings are saved, and the device is updated. NOTE: Before adding a new server, determine the IP address of the Out-of-Band remote log server. Defining a New Out-of-Band Log Server 1 Open the OOB Remote Log Server Settings page. 2 Click Add to display the Add an OOB Log Server page. 3 Complete the fields in the dialog. 4 Click Apply Changes. The server is defined and added to the Available Servers List. Deleting an Out-of-Band Log Server 1 Open the OOB Remote Log Server Settings page. 2 Click Show All to display the OOB Remote Log Servers Table page. 3 Select a server and check the Remove checkbox. 4 Click Apply Changes. The server is deleted, and the device is updated. Configuring Out-of-Band Remote Server Logs Using the CLI Commands The following table summarizes the CLI commands for working with fields in the OOB Remote Log Server Settings page. Configuring System Information 123