Dell PowerConnect 6024 User's Guide (.htm) - Page 335

Configuring Key Chains Using CLI Commands The following table contains the CLI commands for configuring the key chains. Table 8-5. Key Chain CLI Commands CLI Command key-chain nameof-chain key key-id key-string text accept-lifetime start-time endtime | {infinite | start-time | duration starttime seconds} no accept-lifetime send-lifetime start-time endtime | {infinite | start-time | duration starttime seconds}no send-lifetime show key-chains [name-of-chain] Description Identifies an authentication key group. Identifies an authentication key on a key chain. Specifies an authentication string for a key. Sets the time period during which the authentication key is valid for authenticating incoming packets. Sets the time period during which an authentication key is valid to generate an MD5 digest for outgoing packets. Displays key chain information. The following is an example of the CLI commands: Console (config)# key chain M Console (config-key-chain)# key 1 Console (config-key)# key-string mountain Console (config-key)# accept-lifetime duration 13:30:00 Jan 25 2002 7200 Console (config-key)# send-lifetime duration 14:00:00 Jan 25 2002 3600 Console (config-key)# exit Console (config)# exit Console# show key-chains Configuring Routing 345