Dell PowerConnect 6024 User's Guide (.htm) - Page 344

www.dell.com | support.dell.com Enabling OSPF 1 Open the OSPF Parameters page. 2 Define the OSPF Status, Router ID, Redistribute RIP Routes, Redistribute Static Routes, and Redistribute Directly Connected Routes fields. 3 Click Apply Changes. OSPF is enabled on the device. NOTE: OSPF processes can only be cleared using CLI command clear ip ospf process. Enabling OSPF Using CLI Commands The following table contains the CLI commands for enabling OSPF. Table 8-8. OSPF CLI Commands CLI Command Description router ospf enable Enables the OSPF routing process. router ospf router-id Configures an OSPF router ID. ip-address router ospf redistribute rip Enables advertising routes, that are learned by the RIP process, in the OSPF routing process. router ospf redistribute static Advertising routes, configured statically, in the OSPF routing process. outer ospf redistribute Advertising routes directly connected. connected The following is an example of the CLI commands: Console (config)# router ospf enable Console (config)# router ospf router-id 196.127.2.1 Console (config)# router ospf redistribute rip Console (config)# router ospf redistribute static Configuring OSPF Areas The OSPF Areas page contains information for defining and maintaining OSPF areas within which interfaces and virtual links are defined. Once an OSPF area is created, OSPF is automatically enabled on all IP interfaces. To display the OSPF Areas page, click Router→OSPF→Areas in the tree view. 354 Configuring Routing