Dell PowerConnect 6024 User's Guide (.htm) - Page 450

www.dell.com | support.dell.com 3 Enter a name for the policy in the New Policy Name field. 4 Do one of the following: • To configure a class map for the class, click Class Map and select a class map from the drop-down menu. • To configure a trust action a the class, click Action, click Trust, and select a trust method from the drop-down menu. • To configure Set/Mark actions, click Set, select a method from the drop-down menu and enter a value in the New Value field. 5 If you want to configure policing for the class, click Police, and select a policer type from the drop-down menu. • For an aggregate policer, select an aggregate policer from the Aggregate Policer dropdown menu. • For a single policer, complete the information in the Committed Information Rate (CIR), Committed Burst Size (CBS), and Exceed Action fields. 6 Click Apply Changes. The policy and its first class are created, and the device is updated. Adding a Class 1 Open the QoS Policy page. 2 Select a policy from the drop-down menu. 3 Edit the information in the fields on the page, and click Apply Changes. The class is added to the policy, and the device is updated. Deleting Policies: 1 Open the QoS Policy page. 2 Click Show All to display the Policy Table page. 3 Click Remove for each of the policies to be deleted, and then click Apply Changes. The policies are deleted from the system, and the device is updated. Defining Policies Using the CLI Commands Table 10-15. Policy CLI Commands CLI Command policy-map policy-mapname Description Creates a policy map, and enters policy map configuration mod. 460 Configuring Quality of Service