Dell PowerConnect 6024 User's Guide (.htm) - Page 325

1 Open the IP Static Route page. 2 Define the fields on the page. NOTE: Selecting a Route Type of Reject ensures routes to the designated network inaccessible. To define a static route to a host located on a remote network, select Remote for Route Type. To define a static route to a host located on the local network, select Local for Route Type. The Destination IP Address and Network Mask designates the remote network address. The Next Hop is the address of a router directly connected to your switch. The Destination IP Address is the address of the host. The Next Hop should be filled in as 0.0.0.0. 3 Click Apply Changes. The new static route is added, and the device is updated. Removing an IP Static Route 1 Open the IP Static Route page. 2 Click Show All to display the IP Static Route Table. 3 Check Remove for the Destination IP address of the static route you want to remove. 4 Click Apply Changes. The static route is deleted, and the device is updated. Configuring the IP Static Table Using the CLI Commands The following table contains the CLI commands for configuring the IP Static Table. Table 8-2. IP Static Route Table CLI Commands CLI Command ip route prefix {mask | prefix-length} gateway [metric distance] [rejectroute] Description Establishes static IP routes. The following is an example of the CLI commands: Console (config)# ip route 172.16.0.0 255.255.0.0 131.16.1.1 Configuring Routing 335