Dell PowerConnect 6024 User's Guide (.htm) - Page 442

www.dell.com | support.dell.com Setting a Tail Drop Threshold 1 Open the QoS Tail Drop page. 2 Select a threshold for each queue. 3 Click Apply Changes. The tail drop threshold is configured, and the device is updated. Setting Tail Drop Parameters for an Interface: 1 Open the QoS Tail Drop page. 2 Click Show All to display the Tail Drop Table page. 3 Select a status for each interface. 4 Click Apply Changes. 5 The tail drop status is defined for the interfaces. Defining QoS Tail Drop Settings Using the CLI Commands Table 10-12. Tail Drop Settings CLI Commands CLI Command qos wrr-queue threshold queue-id thresholdpercentage Description Assigns tail-drop thresholds. The following is an example of the CLI commands to define tail drop settings: console(config)#qos wrr-queue threshold 8 80 Defining QoS Class Maps One IP ACL and/or one MAC ACL comprise a class map. Class maps are configured to match packet criteria, and are matched to packets on a first-fit basis. For example, Class Map A is assigned packets based only on an IP-based ACL or a MAC-based ACL. Class Map B is assigned to packets based on both an IP-based and a MAC-based ACL. Use the QoS Class Map page to enable assigning and editing class maps. To open the page, click Quality of Service→Advanced QoS Mode→Class Map in the tree view. 452 Configuring Quality of Service