Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide
Dell PowerConnect W-Airwave Manual
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerConnect W-Airwave manual content summary:
- Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 1
Dell PowerConnect W AirWave 7.2 Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 2
corporation for this action and indemnifies, in full, Dell PowerConnect W Networks, Inc. from any and all legal actions that might be taken against it with respect to infringement of copyright on behalf of those vendors. Dell PowerConnect W AirWave 7.2 | Configuration Guide 0510904-01 | April 2011 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 3
Dell PowerConnect W AP Groups in Configuration 27 Selecting Dell PowerConnect W AP Groups 28 Configuring Dell PowerConnect W AP Groups 28 General WLAN Guidelines ...28 Guidelines and Pages for WLANs in Dell PowerConnect W Configuration 28 Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 4
> IDS > Signature Matching > Signature 81 Profiles > IDS > Denial of Service 81 Profiles > IDS > Denial of Service > Rate Threshold 84 Profiles > IDS > Impersonation 85 Profiles > IDS > Unauthorized Device 86 Profiles > Mesh...89 4| Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 5
VPN Services > IPSEC 155 Advanced Services > VPN Services > IPSEC > Dynamic Map 156 Advanced Services > VPN Services > IPSEC > Dynamic Map > Transform Set 157 Groups > Dell PowerConnect W Config Page and Section Information 158 Index ...159 Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 6
6| Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 7
configuration guide is intended for wireless network administrators and helpdesk personnel who deploy AOS on the network and wish to manage it with the AirWave Wireless Management Suite (AWMS). AWMS versions 6.3 and later support Dell PowerConnect W Configuration. This document provides instructions - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 8
Contacting Support Table 2 Website contact Website Main Website Support Website Documentation Website dell.com support.dell.com support.dell.com/manuals 8 | Preface Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 9
a complete description of AOS, refer to the Dell PowerConnect ArubaOS User Guide for your release. The Dell PowerConnect W Configuration feature in the AirWave Wireless Management Suite consolidates AOS configuration and pushes global Dell PowerConnect W configurations from one utility. This chapter - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 10
the following pages: "Device Setup > Dell PowerConnect W Configuration Page" on page 11-deploys and maintains global Dell PowerConnect W Configuration in AWMS. You can limit the view to a folder. 10 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 11
Advanced Services. Each of these sections is summarized in "Dell PowerConnect W Configuration Sections in the Tree View" on page 13. Figure 2 Device Setup > Dell PowerConnect W Configuration Page Illustration Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 12
Figure 4. Each of the sections is explained in "Dell PowerConnect W Configuration Sections in the Tree View" on page 13. Figure 4 Groups > Dell PowerConnect W Config with Group-Level Configuration 12 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 13
visibility, and refer to "Visibility in Dell PowerConnect W Configuration" on page 33. You can import a controller configuration file from AOS for Dell PowerConnect W AP Group deployment in AWMS. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration in AWMS | 13 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 14
to configure and use AP Overrides, refer to these topics: "AP Overrides Guidelines" on page 30 "AP Overrides" on page 42 in the Appendix 14 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 15
8 Dell PowerConnect W Configuration > Profiles Navigation Profiles are organized by type. Custom-named profiles do not appear in the navigation pane as do custom-named Dell PowerConnect W AP Groups, WLANs, and AP Overrides. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 16
. Figure 10 Dell PowerConnect W Configuration > Local Config Navigation For complete details on the Local Config section, refer to "Local Config of SNMP Management" on page 145 in the Appendix. 16 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 17
Dell PowerConnect W AP Groups that differ by one more settings. Controller overrides can be added from the controller's APs/Devices > Manage page. Figure 13 illustrates an APs/Devices > Manage page with controller overrides: Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 18
disable Dell PowerConnect W GUI configuration from the Groups > Basic page and use template-based configuration.See the Templates chapter of the Dell PowerConnect W AirWave 7.2 User Guide for more information on templates. 18 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 19
original Dell PowerConnect W AP Group configuration page. This embedded configuration is also supported on the Additional Dell PowerConnect W Profiles section of the Groups > Dell PowerConnect W Config page. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 20
configuration. For additional information and instructions about using Manage and Monitor Only modes, refer to deployment of Dell PowerConnect W Configuration to minimize impact on network performance. Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 21
PowerConnect W AirWave 7.2 User Guide in the "Performing Daily Operations in AWMS" chapter. Procedure Perform the following steps to deploy Dell PowerConnect W Configuration when at least one Dell PowerConnect W AP Group currently exists on at least one Dell PowerConnect W controller on the network - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 22
page allows you to select the profiles to apply to the Dell PowerConnect W AP Group, and to select one or more WLANs that support that Dell PowerConnect W AP Group. Figure 17 illustrates this page. 22 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 23
SSID profiles are not listed under the WLAN column, but under Profiles. d. Save changes to each element as you proceed through profile and WLAN configuration. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration in AWMS | 23 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 24
/Devices > Manage page. For additional information, refer to "Supporting APs with Dell PowerConnect W Configuration" on page 30. Figure 18 APs/Devices > Manage Page Illustration > Mismatched page. 24 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 25
: Once Dell PowerConnect W Configuration is deployed in AWMS, you can perform debugging with Telnet/ SSH. Review the telnet_cmds file in the /var/log folder from the command line interface, or access this Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration in - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 26
file from the System > Status page. Refer to the Dell PowerConnect W AirWave 7.2 User Guide for additional information. To resolve communication issues, review the credentials on the APs/Devices > Manage page. Mismatches can occur when importing profiles because AWMS deletes orphaned profiles, - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 27
modify devices in Dell PowerConnect W AP Groups with the APs/Devices > List page, clicking Modify Devices. This is the page where you assign devices to a given group and Dell PowerConnect W AP Group. Dell PowerConnect W AirWave 7.2 | Configuration Guide Using Dell PowerConnect W Configuration in - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 28
be pushed to Dell PowerConnect W controllers to become active on the network. General Profiles Guidelines Dell PowerConnect W AP Groups and WLANs, and Dell PowerConnect W Configuration supports Dell PowerConnect W Configuration in Daily Operations Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 29
page, use the Modify Devices link on the Groups > Monitor page to place these devices into Manage mode. This instructs AWMS to push the device configurations to the controller. Dell PowerConnect W AirWave 7.2 | Configuration Guide Using Dell PowerConnect W Configuration in Daily Operations | 29 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 30
click Dell PowerConnect W AP Groups from the navigation pane. This page displays and allows editing for all Dell PowerConnect W AP Groups that are currently configured in AWMS. 30 | Using Dell PowerConnect W Configuration in Daily Operations Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 31
name in the Device column. 6. Scroll the bottom of the page and put APs in the appropriate AWMS group and folder. Set the devices to Manage Read/Write mode. Dell PowerConnect W AirWave 7.2 | Configuration Guide Using Dell PowerConnect W Configuration in Daily Operations | 31 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 32
group at a time. Supporting one AP in two or Dell PowerConnect W generally recommends the first approach where you use groups for AP type and folders strictly for AP location. 32 | Using Dell PowerConnect W Configuration in Daily Operations Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 33
, and user roles as described in the Dell PowerConnect W AirWave 7.2 User Guide. Defining Visibility for Dell PowerConnect W Configuration Perform these steps to define or adjust visibility for users to manage and support Dell PowerConnect W Configuration: 1. As required, create a new AWMS device - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 34
the Device Setup > Add page following instructions available in the Dell PowerConnect W AirWave 7.2 User Guide. 3. As required, create or edit a user role that is to have rights and manage privileges required to support their function in Dell PowerConnect W Configuration. a. At least one user must - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 35
. Refer to the Dell PowerConnect W AirWave 7.2 User Guide, as required. 5. Observe visibility created or edited with this procedure. The user, role, and device folder created with this procedure are now available to configure, manage, and support Dell PowerConnect W Configuration and associated - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 36
36 | Using Dell PowerConnect W Configuration in Daily Operations Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 37
and topics: Dell PowerConnect W AP Groups AP Overrides WLANs Profiles Security Local Config of SNMP Management Advanced Services Groups > Dell PowerConnect W Config Page and Section Information Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 38
to support Dell PowerConnect W Configuration. Once created, that new WLAN will appear with others on this page. To set the WLANs that appear on this page, select (check) the desired WLANs, then click Show Only Selected. 38 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 39
radio profile includes a reference to an Adaptive Radio Management (ARM) profile. If you would like the ARM and enabled ARM profile. If you want to manually select a channel for each AP group, create Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 39 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 40
the wireless network, network. Select the pencil icon next to this field to display the Profiles > IDS page and adjust these settings as desired. Select Save to return to the Add AP Group page. 40 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 41
Mesh Cluster Profile-Drop-down menu displays all supported profiles. Select one from the menu. Dell PowerConnect W AP Group. This group now appears in the navigation pane of the Dell PowerConnect W Configuration page. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 42
section lists the WLANs currently defined in Dell PowerConnect W Configuration by default. You can display selected WLANs or all WLANs. Select one or more WLANs for which AP Override is to apply. 42 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 43
settings as desired. Select Save to return to the Add AP Group page. For additional information, refer to "Profiles > RF > Event Thresholds" on page 107. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 43 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 44
settings as desired. Select Save to return to the Add AP Group page. For additional information, refer to "Profiles > AP > SNMP" on page 71. 44 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 45
Management" on page 95 Specifies the minimum percentage of available bandwidth to be allocated to a specific SSID when there is congestion on the wireless network displays all supported profiles. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 45 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 46
click Save to preserve changes to an existing AP Overrides profile. The AP Overrides page and the Dell PowerConnect W Configuration navigation pane display the name of the AP Overrides profile. 46 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 47
APs on the WLAN and in the respective Dell PowerConnect W AP Groups. Traffic Management Lists Traffic Management profiles that are currently configured and deployed on describes these two pages. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 47 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 48
folder with which the WLAN is associated. The drop-down menu displays all folders available for association with the WLAN. Name of the WLAN. 48 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 49
In a 802.11k network if the AP with support on the AP Forceful disassociation of on-hook voice clients Measurement mode for beacon reports. For more details, see the "Configuring 802.11k Protocol" topic in the Dell PowerConnect ArubaOS 6.0 User Guide. Manages settings for the bandwidth management - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 50
the PBX remain secure in the corporate office. Secure Remote Access Point Service can also be used to secure control traffic between an AP and the controller mesh network advertising on the WLAN. 50 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 51
networks. This feature is disabled by default, and must be enabled in a Virtual AP profile. Steering Mode prefer-5ghz Band steering supports in the Dell PowerConnect W Configuration navigation pane. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 52
instructions, continue to the related procedures in this section. Browse to the Device Setup > Dell PowerConnect the profiles and settings supported in Dell PowerConnect W Configuration. Profiles > Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 53
network. This profile defines login wait times and the URLs for login and welcome pages, and manages Wireless Internet Service Provider roaming (WISPr) protocol allows users to roam between service Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 53 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 54
role. This setting requires a voice service license. Select the XML API server to support the AAA profile being configured, if required. This section is blank if there are no XML API servers. 54 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 55
RADIUS server to support the AAA profile Service (IAS) in Windows (see http://technet2.microsoft.com/windowsserver/en/technologies/ias.mspx). In Dell PowerConnect W user-centric networks wireless intrusion protection license. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 56
network domain using a machine account. Within the domain, the device is authenticated before computer group policies and software whether this is to be supported from the authentication server. Define Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 57
maximum size of wireless networks supported range is from 1 to 10. Enable or disable multicast key rotation, and define the related settings on this page for multicast key rotation time and interval if this field is enabled. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 58
and installed on the IAS system. On each wireless client device, the local certificate authority is added as a trusted certificate authority, thus allowing this certificate to be trusted. 58 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 59
MAC address or by emulating wireless clients. This forces the should manage logoff feature is supported. This profile. This setting requires a voice service license. Select Add or Save. The Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 59 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 60
backup servers are configured and a server is unresponsive, it is marked as out of service for the dead time; subsequent requests are sent to the next server on the the Profiles > AAA page. 60 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 61
the user is blacklisted.The range is 1-10. Allows the user to see and select the fully-qualified domain name (FQDN) on the login page. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 61 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 62
CHAP protocol. You should not use this option unless instructed to do so by a representative from Dell PowerConnect W. Sygate-on-demand- No agent Enables client remediation with the profile. 62 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 63
Auth This profile type enables or disables 802.1x authentication for clients on non-Dell PowerConnect W APs, and defines the default role for those users once they are Auth details page. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 63 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 64
tunnel to the controller. The authentication server can be any type of server supported by the controller, including the controller's internal database. Perform these steps to the profile. 64 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 65
Profiles > AAA > Management Auth Users who need to access the controller to monitor, manage, or configure the Dell PowerConnect W user-centric network can be authenticated with of this profile. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 65 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 66
different ISPs. Refer to the Dell PowerConnect ArubaOS User Guide for additional information about stateful NTLM and WISPr authentication. Perform these steps to configure a WISPr Auth profile. 66 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 67
of failures. This setting requires a wireless intrusion protection license. Logon Wait Minimum and minimum logon wait times are enforced. The supported range is from 1% to 100%. WISPr Location- Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 67 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 68
-Defines and enables SNMP settings, to include community string and SNMP user profiles. "Profiles > AP SNMP user name and authentication profile to support more general SNMP profiles. Refer to " Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 69
are 10, 100, or 1000 Mbits. Duplex auto Defines this profile to support duplex Ethernet. Options are full, half, or auto. 3. Select Add or service name for the AP. The PPP username provided A PPP password, if provided Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 70
steps to configure a Regulatory Domain profile. 1. Select Profiles > AP > Regulatory Domain in the Dell PowerConnect W Navigation pane. This page summarizes the current profiles of this type. 70 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 71
page. Profiles > AP > SNMP Dell PowerConnect W controllers and APs support versions 1, 2c, and 3 of Simple Network Management Protocol (SNMP) for reporting purposes only SNMP in this profile. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 71 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 72
on the IPSec tunnel to the controller, the remote AP establishes connectivity with a backup controller from the list and automatically reboots. Network connectivity is lost during this time. 72 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 73
re-encrypted in the IPSec tunnel. When this feature is disabled, the wireless frame is only encapsulated inside the IPSec tunnel. All other types of VLAN. The supported range is from 0 to 4094. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 73 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 74
if you wish to support an Aeroscout RTLS server. Specify whether the Dell PowerConnect W controller uses an Ortonics walljack. Ortronics Wi-Jack and Wi-Jack Duo thin client access points are centrally configured and managed by the Dell PowerConnect W Networks wireless controllers to provide a high - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 75
speed networks. The supported range Domain Enter the domain name service (DNS) domain or domains network. If enabled, APs stop flooding unnecessary traps and syslog messages to network management systems or network Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 76
to configure a Wired profile. 1. Select Profiles > AP > Wired in the Dell PowerConnect W Navigation pane. This page summarizes the current profiles of this type. 2. Select is a trusted port. 76 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 77
, which detect and disable rogue APs and other devices that can potentially disrupt network operations. An AP is considered to be a rogue AP if it is both configuration of the IDS profile. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 77 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 78
> Signature Matching > Signature" on page 81. Denial of Service-Configures traffic anomaly settings for Denial of Service (DoS) attacks. Refer to "Profiles > IDS > Impersonation" on page 85. 78 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 79
to "Profiles > IDS > Denial of Service > Rate Threshold" on page 84. This setting takes effect only if the Dell PowerConnect W Mobility Manager is configured. Otherwise, statistics update to the Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 79 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 80
/disable debug of containment from the wireless side. Note: Enabling this debug option is 60. Enable/disable RTLS communication with the configured mobility-manager Enable or disable sending Ad hoc Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 81
traffic anomaly settings that detect and process denial-of-service attacks. This profile type defines the parameters that are monitored and acted upon when detecting and blacklisting an offending Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 81 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 82
responsethresholds Rate Thresholds for Auth Frames Perform these steps to configure or edit an IDS Denial of Service profile, and to create or edit profiles that are referenced by a DOC profile. 82 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 83
1. Select Profiles > IDS > Denial of Service in the Dell PowerConnect W Navigation pane. 2. Select the Add button to create a new Signature within the Flood Increase Time to trigger an alarm. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 83 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 84
with Denial of Service profiles. 1. Select Profiles > IDS > Denial of Service > Rate Thresholds in the Dell PowerConnect W Navigation pane. This page summarizes the current thresholds available. 84 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 85
described in Table 32: Table 32 Profiles > IDS > Denial of Service, Rate Threshold Settings Field Default Description General Settings Folder Name Top Blank detection, or a honeypot attack. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 85 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 86
service network. An AP is considered to be an interfering AP if it is seen in the RF environment but is not connected to the wired network. While the interfering AP can potentially cause RF 86 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 87
is also described in the Dell PowerConnect W AirWave 7.2 User Guide in Home > Documentation. You can enable a policy to automatically disable APs that are classified as a rogue APs by the Dell PowerConnect W system. When a rogue AP is disabled, no wireless stations are allowed to associate - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 88
through a denial of service attack. Allow Well Known MAC Allow devices with known MAC addresses to classify rogues APs. Depending on your network, configure one or MAC OUIs Valid SSID list 88 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 89
the network by defining multiple cluster profiles. AirWave provides a "default" version of the mesh cluster profile. You can use the "default" version or create a new instance of a profile which you can then edit as you need. You can Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 90
try to find a better link on the same channel and cluster (only neighbors on the same channel are considered). The supported threshold is hardware dependent, with a practical range of 1 to 255. 90 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 91
bringing up the mesh network, mesh nodes have of this software, an AP supports a range from 0 to 15. RTS Threshold (256-2346 bytes) 802.11a Transmit Rates 2333 All selected Define the packet size Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 91 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 92
This parameter is enabled by default. Set the maximum size of a received aggregate MAC Protocol Data Unit (A-MPDU 32767, or 65535 bytes. AWMS may support additional options. Set the minimum time between Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 93
Size Sets maximum size of a transmitted aggregate MPDU, in bytes. Specify size in the supported default, reduces network traffic overhead by effectively eliminating the need to initiate a new transfer for every Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 94
background. The 802.1D priority value is contained in a two-byte QoS control field in the WMM data frame.Refer to "Profiles > QoS > WMM Traffic Management" on page 97. 94 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 95
when there is congestion on the wireless network. Define this as a percentage. 3. Select Add or Save. The added or edited profile appears on the Profiles > QoS > Traffic Management page. Profiles > QoS > VoIP Call Admission Control Dell PowerConnect W's Voice Call Admission Control limits the - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 96
the SIP invite may be redirected through a number of servers before reaching the controller. Enable or disable SIP call setup keepalive with this field. 96 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 97
Add button to create a new WMM Traffic Management profile, or click the pencil icon next to an existing profile to edit. The Details page appears. Complete the settings as described in Table 17: Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 97 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 98
Enable or disable Quality of Service with the WMM Traffic Management profile. Define the percentage of QoS for each type of service to be supported in WMM. NOTE: If Radio > HT Radio" on page 106. 98 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 99
configure as necessary. Each RF management profile also has a radio-enable supporting profiles as you define 802.11a/g Radio profiles. 1. Select Profiles > RF > 802.11a/g in the Dell PowerConnect Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 99 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 100
its immediate neighbors, or if a neighboring Dell PowerConnect W AP on another channel does not have any clients, load balancing will be enabled on that AP. This feature is disabled by default. 100 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 101
Management (ARM) and Wireless IDS functions and slightly increases packet processing performance. If a radio is configured to operate in Air Monitor mode, then the ARM/WIDS override functions are always enabled, regardless of whether or not this check box is selected. Dell PowerConnect W AirWave - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 102
supported maximum, the maximum supported value wireless Management (ARM) profile. When you assign an active ARM profile to a mesh radio, ARM's automatic power-assignment and channel-assignment 102 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 103
software, communicates want to manually assign channels supported by this ARM profile. The drop-down menu supports the following options: a-only-802.11a radio bands g-only-802.11g radio bands all-both 802.11a and g bands Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 104
to decrease their power to prevent interference. However, if the wireless clients down on the floor do not have such a clear management traffic on the network. Active Scan is disabled by default, and should not be enabled except under the direct supervision of AirWave or Dell PowerConnect W Support - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 105
ARM preserves network resources during periods of high traffic by temporarily halting ARM scanning if the load for the AP gets too high. The supported range for this in the APs regulatory domain Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 105 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 106
High Throughput (HT) Radio profiles. 1. Select Profiles > RF > HT Radio in the Dell PowerConnect W Navigation pane. 2. Select the Add button to create a new HT Radio profile, or the profile. 106 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 107
the ageout time for XBox consoles. Cordless Network 25 seconds Define the ageout time for cordless network frequency hopping devices. Frequency Hopper Cordless Base as described in Table 28: Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 107 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 108
-receive errors. When the percentage of errors in received frames exceeds the configured low watermark, the system generates an alert. Defining 0% disables this function. 108 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 109
as a percentage of load balancing utilization. The supported range is 0 to 100%, and a value of 0% disables this function. When this watermark is exceeded, it triggers an alert or wait time. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 109 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 110
AP load balancing restarts on the AP. The supported range is 0 to 360,000 seconds, and improve general network load. Enable or disable an AP's ability to detect failures in wireless user associations. Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 111
-High-throughput APs support additional settings not 120. 802.11k-Manages settings for the 802.11k wireless network. The ESSID can be up to 31 characters. If the ESSID includes spaces, you must enclose it in quotation marks. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 112
Passphrase Select any encryption type to be supported in this SSID profile. The supported encryption types are as follows: -wep-Dynamic WEP with a key management service wpa-tkip-Wi-Fi Protected Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 113
sending the TSPEC request (the default is one second). You enable TSPEC signaling enforcement in the VoIP Call Admission Control profile. The supported range is 0 to 3,600,000 milliseconds. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 113 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 114
life, but can also decrease client responsiveness. Specify the maximum number of transmit failures to be supported before a radio is considered to be down. A setting of 0 disables this feature. 114 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 115
problems. 3. Select Add or Save. The added or edited profile appears on the Profiles > SSID page. Profiles > SSID > EDCA AP Wireless not support QoS contention window (CW) size For each AC, Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 115 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 116
for traffic prioritization depends on the following configurable parameters for each AC: arbitrary inter-frame space number (AIFSN) minimum and maximum contention window (CW) size 116 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 117
and maximum contention window (CW) size For each AC, the backoff time supported on APs configured with this EDCA profile. 3. Select Add or Save. The added or edited profile appears on the Profiles > SSID > EDCA AP page. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 118
Wireless or devices that do not 0, 3 support QoS Background Low priority traffic (file downloads (AIFSN) minimum and maximum contention window (CW) size For each AC, the backoff time is the sum Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 119
AC. Define whether or not admission control mandatory (ACM) is to be supported on APs configured with this EDCA profile. WMM is an extension to the and maximum contention window (CW) size Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 119 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 120
minimum and maximum contention window (CW) size Transmission Opportunity 47 Slots in 32 uSec not admission control mandatory (ACM) is to be supported on APs configured with this EDCA profile. 3. Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 121
by default, reduces network traffic overhead by effectively eliminating the need to initiate a new transfer for every MPDU. Set the maximum size of a transmitted aggregate is enabled by default. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 121 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 122
In a 802.11k enabled network, APs and clients can support the selected measurement mode, it returns a Beacon Measurement Report with the Incapable bit set in the Measurement Report Mode field. 122 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 123
feature is disabled by default. 3. Select Add or Save. The added or edited profile appears on the 802.11K page, and on the details page. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 123 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 124
> Policies Security > Policies > Destinations Security > Policies > Services Security > Server Groups Security > Server Groups > LDAP Security > Time Ranges Security > User Rules 124 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 125
receives in the wireless network. Thus, QoS for voice applications is configured when you configure firewall roles and policies. In an Dell PowerConnect W system, you Authentication" on page 59. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 125 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 126
any value between 0-65535. (Optional) Set the time, in minutes, after which the client is required to reauthenticate. Enter a value between 0-4096. 0 disables reauthentication. 126 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 127
> User Roles page. Security > User Roles > BW Contracts You can manage bandwidth utilization by assigning maximum bandwidth rates, or bandwidth contracts, to user roles 'guest' role in Mbps. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 127 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 128
the VPN Dialer is associated. The drop-down menu displays all folders available for association with the profile. Enter the name of the profile. 128 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 129
Send traffic to the No direct network in clear Disable wireless No devices when client is wired supported for PPP in the VPN. The following options are available: CHAP Cache SecurID Token MSCHAP MSCHAPv2 PAP Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 130
the editing of an existing profile. You return to the VPN Dialers page. The new profile appears below the Add New VPN Dialer button. 130 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 131
> Services" on page 133), or the plus sign to create a new Netservice profile. protocol: Using this option, specify a different layer 4 protocol (other than TCP/ UDP) by configuring the IP protocol value. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 132
this rule. Whether to pause Adaptive Radio Management scan activity when traffic is present. Note . Whether to blacklist any user. Value of type of service (TOS) bits to be marked in the IP header of Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 133
the rule applies to Host, Network, or Range. IP support the TCP/UDP service being configured. Appears if List is specified in Port Selection. Enter a comma separated list of ports. Requires a minimum version of 6.0.0.0. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 134
Services menu. The following application level gateway types are supported: dhcp dns ftp h323 following: AAA Captive Portal Auth Management Auth Stateful 802.1X Auth TACACS Accounting Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 135
second server. Supported Servers ArubaOS supports the following external authentication servers: RADIUS (Remote Authentication Dial-In User Service) LDAP be authenticated on another server. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 135 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 136
the following caveats when using a match FQDN rule: This rule does not support client information in the host/. format, so it is not useful available for inclusion in server 136 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 137
setting to allows clear-text (unencrypted) communication with the LDAP server. Enter the port server from the drop-down menu. LDAP servers support the following connection types: clear-text-No Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 137 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 138
out the request and resending it. Set the Network Access Server (NAS) identifier to use in RADIUS NAS IP address that the controller uses for communications with all RADIUS servers. If you do not Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 139
name of the server. IP address of the host. Set the shared secret to authenticate communication between the TACACS+ client and server. Set the TCP port to be used by to be used by server groups. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 139 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 140
instructions supports server groups that can include XML API servers. XML API servers send and accept requests for information. XML API servers process such requests and act on these requests by 140 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 141
secret to authenticate communication between the XML support dynamic authorization extensions to Remote Authentication Dial-In User Service (RADIUS). Dell PowerConnect W Configuration supports Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 141 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 142
commands. You can have all commands reported as desired. Dell PowerConnect W Configuration supports TACACS Accounting servers that can be referenced by server additional parameters, as follows. 142 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 143
the time period is to end. Select Add to complete the Time Period profile, or click Save to complete the editing of an existing profile. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 143 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 144
's MAC address. Navigate to the Security > User Rules page in the Dell PowerConnect W Configuration navigation pane. This page displays user rules that are currently configured drop-down menu. 144 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 145
via the SNMP Management > SNMPv3 User profile. Configure the security string for notification messages. Does not appear if SNMP Version is set to 3. The port number to which trap notification messages are sent. Default is 162. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 146
are using SNMPv3 to obtain values from the Dell PowerConnect W controller, navigate to Local Config > SNMP Management > SNMPv3 User to configure the following parameters: to an edited profile. 146 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 147
example, you could set up a mobility domain that contains only local controllers; you still need to configure the mobility domain on the master controller that manages the local Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 147 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 148
75 Advanced Services > IP network. Set the maximum number of users to be supported by the foreign network. Set the maximum number of times that a retransmit is to be supported on the foreign network Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 149
. Define how long IP mobility is to support hosts should there be a disconnection. Define how long host entries in the IP mobility domain are to be maintained when they are without mobility. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 149 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 150
packets that can be supported for a given transaction in proxy DHCP. All BOOTP packets are at least 300 bytes in size, by specification. BOOTP service for the same user VLAN, you must configure 150 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 151
software that encapsulates and encrypts traffic and sends it to a VPN gateway at the destination network. The controller supports the following remote access VPN protocols: Layer-2 Tunneling Protocol over IPSec (L2TP/IPSec) Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 152
Services > VPN Services > IKE page from the Dell PowerConnect W Configuration navigation pane. This page displays all Internet Key Exchange (IKE) profiles currently available for VPN Services. 152 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 153
technology that enables VPN connections across public networks such as the Internet. L2TP/IPSec provides both a logical transport mechanism on which to transmit PPP frames as well as tunneling or encapsulation so that the Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 154
-Shamir-Aldeman (RSA) RC-4 encryption algorithm. PPTP connections require user-level authentication through a PPP-based authentication protocol (MSCHAPv2 is the currently-supported method). 154 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 155
-encapsulated data. User-level authentication through a PPP-based authentication protocol using passwords, SecureID, digital certificates, or smart cards after successful creation of the SAs. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 155 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 156
the pencil icon next to an existing map to modify settings. The Add/Edit Details page contains the fields as described in Table 82: 156 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 157
create the new Transform Set, or click Save if editing an existing Transform Set. The Transform Set is available for reference by Dynamic Maps in support of IPSEC profiles and VPN services. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 157 - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 158
125 "Visibility in Dell PowerConnect W Configuration" on page 33 Dell PowerConnect W Policies "Security > Policies" on page 131 "Visibility in Dell PowerConnect W Configuration" on page 33 158 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 159
Manage 17 APs/Devices > Monitor 18 D Dell PowerConnect W AP Groups general procedures and guidelines 27 Dell PowerConnect W Configuration Advanced Services > Dell PowerConnect W Configuration 11 E Encryption 30 F folders using with APs 32 Dell PowerConnect W AirWave 7.2 | Configuration Guide G - Dell PowerConnect W-Airwave | W-Airwave 7.2 Configuration Guide - Page 160
124 Security > Policies 131 Security > Policies > Destinations 132 Security > Policies > Services 133 Security > Server Groups 134 Security > Server Groups > Internal 140 Security descriptions 47 WLANs > Advanced 48 WLANs > Basic 48 160 | Index Dell PowerConnect W AirWave 7.2 | Configuration Guide
Dell PowerConnect W
AirWave 7.2
Configuration Guide