Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 24

All other settings supported on Dell PowerConnect W controllers can be defined on the Dell PowerConnect W Configuration page. The following section in this document provides additional information about configuring profiles:  "General Profiles Guidelines" on page 28 10. Provision multiple Dell PowerConnect W AP Groups on one or more controllers by putting the controllers into an AMP group and configuring that group to use the selected Dell PowerConnect W AP Groups. With global configuration enabled, configure such Dell PowerConnect W AP Groups settings on the Group > Dell PowerConnect W Config page. With group configuration, use the Dell PowerConnect W AP Groups The following section of this document provides additional information:  "General Dell PowerConnect W AP Groups Procedures and Guidelines" on page 27 11. As required, add or edit AP devices. The following section of this document has additional information:  "Supporting APs with Dell PowerConnect W Configuration" on page 30 12. Each AP can be assigned to a single Dell PowerConnect W AP Group. Make sure to choose an AP Group that has been configured on that controller using that controller's AMP Group. Use the APs/Devices > List, Modify Devices field and the APs/Devices > Manage page. You can create or edit settings such as the AP name, syslocation, and syscontact on the APs/Devices > Manage page. For additional information, refer to "Supporting APs with Dell PowerConnect W Configuration" on page 30. Figure 18 APs/Devices > Manage Page Illustration (Partial Display) 13. Navigate to the APs/Devices > Audit page for the controller to view mismatched settings. This page provides links to display additional and current configurations. You can display all mismatched devices by navigating to the APs/Devices > Mismatched page. 24 | Dell PowerConnect W Configuration in AWMS Dell PowerConnect W AirWave 7.2 | Configuration Guide