Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 146
Field, Description, SNMPv3 Users
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Table 73 Local Config > SNMP Management Profile Settings Field Description Send Informs Whether to send SNMP inform messages to the configured host. Displays when 2c is selected in SNMP Version. SNMPv3 Users If you are using SNMPv3 to obtain values from the Dell PowerConnect W controller, navigate to Local Config > SNMP Management > SNMPv3 User to configure the following parameters: User name A string representing the name of the user. Authentication protocol An indication of whether messages sent on behalf of this user can be authenticated, and if so, the type of authentication protocol used. This can take one of the two values: MD5: HMAC-MD5-96 Digest Authentication Protocol SHA: HMAC-SHA-96 Digest Authentication Protocol Authentication protocol password If messages sent on behalf of this user can be authenticated, the (private) authentication key for use with the authentication protocol. This is a string password for MD5 or SHA depending on the choice above. Privacy protocol An indication of whether messages sent on behalf of this user can be protected from disclosure, and if so, the type of privacy protocol which is used. This takes the value DES (CBC-DES Symmetric Encryption Protocol). Privacy protocol password If messages sent on behalf of this user can be encrypted/decrypted with DES, the (private) privacy key for use with the privacy protocol. Select Add to create this profile, or click Save to retain changes to an edited profile. 146 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide