Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 133
Security > Policies > Services, Destination
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Table 60 Security > Policies > Destinations Field Descriptions (Continued) Field Default Description Rules Invert IPv6 No Use this field to invert the destination from one end of the VPN connection to the other. No Select this button to create a new rule for this destination profile. Selecting this button displays the Net Destination Rule section for the selected protocol, which is comprised of two settings: Rule Type-Specify whether the rule applies to Host, Network, or Range. IP Address-Enter the IP address for the net destination rule. Select Add to complete the configuration of the Destination policy profile, or click Save to complete the editing of an existing profile. The new destination appears on the Security > Policies > Destinations page. Security > Policies > Services The Security > Policies > Services page displays all Netservice profiles that are available for reference by Security policies. This page displays Netservice profile names, the protocol associated with it, the policy that uses this Netservice profile, and the folder. Select Add to create a new Netservice profile, or click the pencil icon next to an existing Netservice profile to edit it. The Security > Policies > Services page contains the following fields, as described in Table 61: Table 61 Security > Policies > Services Field Descriptions Field Default Description General Settings Folder Name Other Settings Protocol Port Selection TCP/UDP Port TCP/UDP Max Port Port List Top Blank Set the folder with which the security policy service is associated. The drop-down menu displays all folders available for association with the service. Enter the name of the destination. TCP Range Specify the protocol that is to support the security policy service being configured. The service options are: TCP UDP IP The remaining fields on this page change according to which protocol you have selected. Choose whether to list ports by Range (which causes the Port and Max Port fields to appear below) or List (which introduces a Port List field and requires a minimum version of 6.0.0.0). Appears if Range is specified in Port Selection. Specify the TCP/UDP port or range of ports to support the service being configured. Appears if Range is specified in Port Selection. Specify the highest port that will support the TCP/UDP service being configured. Appears if List is specified in Port Selection. Enter a comma separated list of ports. Requires a minimum version of 6.0.0.0. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 133