Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 102
Profiles > RF > 802.11a/g Radio > AM Scanning, 11a/g, Profiles > RF > 802.11a/g
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Table 41 Profiles > RF > 802.11a/g Profile Settings (Continued) Field Default Description Maximum Distance 0 Maximum client distance, in meters. This value is used to derive ACK and CTS timeout times. A value of 0 specifies default settings for this parameter, where timeouts are only modified for outdoor mesh radios which use a distance of 16km. The upper limit for this parameter varies from 24-58km, depending on the radio's band (a/g) and 20/40 MHz mode. Note that if you configure a value above the supported maximum, the maximum supported value will be used instead. Values below 600m will use default settings. Protection for Yes 802.11b Clients Supported for 802.11g only, use this field to enable protection for 802.11b clients. Disabling this protection violates the 802.11b standard and may cause interoperability issues. 3. Select Add or Save. The added or edited 802.11a/g profile appears on the Profiles > RF > 802.11a/g page. Profiles > RF > 802.11a/g Radio > AM Scanning Air Monitor (AM) devices establish and monitor RF activity on the network. This profile depends on the controller having a minimum version of 6.0.0.0. Perform these steps to create or edit an Air Monitor Scanning profile. 1. Select Profiles > RF > 802.11a/g Radio > AM Scanning in the Dell PowerConnect W Navigation pane. 2. Select the Add button to create a new AM Scanning profile, or click the pencil icon to edit an existing profile. The Details page appears. Complete the settings as described in Table 42: Table 42 Profiles > RF > 802.11a/g Radio > AM Scanning Profile Settings Field Default Description General Settings Folder Top Name Scan Mode Blank all-regdomain Dwell Time Settings Set the folder with which the profile is associated. The drop-down menu displays all folders available for association with the profile. Enter the name of the AM scanning profile. Set the scanning mode for the radio: all-reg-domain: Scan channels in all regulatory domain rare: Scan all channels (all regulatory domains and rare channels) reg-domain: Scan channels in the APs regulatory domain Regulatory Domain 250 Channels (10032768) Rare Channels (100- 100 32768) Active Channels 500 (100-32768) Non-regulatory 200 Domain Channels (100-32768) Dwell time (in ms) for AP's Regulatory domain channels Dwell time (in ms) for rare channels. Dwell time (in ms) for channels where there is wireless activity. Dwell time (in ms) for channels not in the APs regulatory domain. Profiles > RF > 802.11a/g Radio > ARM Each 802.11a and 802.11g radio profile references an Adaptive Radio Management (ARM) profile. When you assign an active ARM profile to a mesh radio, ARM's automatic power-assignment and channel-assignment 102 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide