Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 71
Profiles > AP > SNMP, Regulatory Domain, pencil, Details, Profiles, Profiles > AP > SNMP
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
2. Select the Add button to create a new Regulatory Domain profile, or click the pencil icon next to an existing profile to edit. The Details page appears. Complete the settings as described in Table 21: Table 21 Profiles > AP > Regulatory Domain Profile Settings Field Default Description General Settings Folder Name Top Blank Set the folder with which the profile is associated. The drop-down menu displays all folders available for association with the profile. Enter the name of the profile. Other Settings Country Code Valid 802.11a 40MHz Channel pairs Valid 802.11g 40 MHz Channel Pairs Valid 802.11a 40MHz Channels Valid 802.11g 40 MHz Channels Designate the country with the 802.1X regulatory standard relevant to this WLAN. Select a 40MHz channel pair for 802.11a. A high-throughput (HT) AP can use a 40 MHz channel pair comprised of two adjacent 20 MHz channels available in the regulatory domain profile for your country. When ARM is configured for a dual-band AP, it will dynamically select the primary and secondary channels for these devices. It can, however, continue to scan all changes in the a+b/g bands to calculate interference and detect rogue APs. Select a 40MHz channel pair for 802.11g Specify the valid channels for 40MHz channel pairing in 802.11a. Specify the valid channels for 40MHz channel pairing in 802.11g. 3. Select Add or Save. The added or edited Regulatory Domain profile appears on the Regulatory Domain Profiles page. Profiles > AP > SNMP Dell PowerConnect W controllers and APs support versions 1, 2c, and 3 of Simple Network Management Protocol (SNMP) for reporting purposes only. In other words, SNMP cannot be used for setting values in an Dell PowerConnect W system in the current AOS version. Perform these steps to configure a SNMP profile. 1. Select Profiles > AP > SNMP in the Dell PowerConnect W Navigation pane. 2. Select the Add button to create a new SNMP profile, or click the pencil icon next to an existing profile to edit. The Details page appears. Complete the settings as described in Table 22: Table 22 Profiles > AP > SNMP Profile Settings Field Default Description General Settings Folder Name Other Settings SNMP Enable Top Blank Set the folder with which the profile is associated. The drop-down menu displays all folders available for association with the profile. Enter the name of the profile. Yes Enable or disable SNMP in this profile. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 71