Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 43

Table 4 AP Overrides Add or Edit Page Fields (Continued) Field Default Description Excluded WLANs Excluded WLANs Referenced Profiles 802.11a Radio Profile 5_am 802.11g Radio Profile 2.4_am RF Optimization Profile default Event Thresholds Profile default This section displays WLANs currently defined in Dell PowerConnect W Configuration by default. This section can display selected WLANs or all WLANs. Use this section to specify which WLANs are not to support AP Override. Defines AP radio settings for the 5 GHz frequency band, including the Adaptive Radio Management (ARM) profile and the high-throughput (802.11n) radio profile. Select the pencil icon next to this field to edit or create additional profile settings in the RF > 802.11a/g Radio page. Select Save to return to the Add AP Group page. For additional information, refer to "Profiles > RF > 802.11a/g Radio" on page 99. Defines AP radio settings for the 2.4 GHz frequency band, including the Adaptive Radio Management (ARM) profile and the high-throughput (802.11n) radio profile. Each 802.11a and 802.11b radio profile includes a reference to an Adaptive Radio Management (ARM) profile. If you would like the ARM feature to select dynamically the best channel and transmission power for the radio, verify that the 802.11a/802.11g radio profile references an active and enabled ARM profile. If you want to manually select a channel for each AP group, create separate 802.11a and 802.11g profiles for each AP group and assign a different transmission channel for each profile. The drop-down menu displays these options:  default  nchannel too high  nchannel too low Select the pencil icon next to this field to edit or create additional profile settings in the RF > 802.11a/g Radio page. Select Save to return to the Add AP Group page. For additional information, refer to "Profiles > RF > 802.11a/g Radio" on page 99. Enables or disables load balancing based on a user-defined number of clients or degree of AP utilization on an AP. Use this profile to detect coverage holes, radio interference and STA association failures and configure Received signal strength indication (RSSI) metrics. Select the pencil icon next to this field to display the Profiles > RF section of Dell PowerConnect W Configuration, and edit these settings as desired. Select Save to return to the Add AP Group page. For additional information, refer to "Profiles > RF > 802.11a/g Radio" on page 99. Defines error event conditions, based on a customizable percentage of low-speed frames, non-unicast frames, or fragmented, retry or error frames. The drop-down menu displays these options:  default  all additional RF profiles currently configured in Dell PowerConnect W Configuration Select the pencil icon next to this field to display the Profiles > RF > Events Threshold section and edit these settings as desired. Select Save to return to the Add AP Group page. For additional information, refer to "Profiles > RF > Event Thresholds" on page 107. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 43