Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 92
Profiles > Mesh > Radio > Mesh HT SSID, Radio, Profiles > Mesh > Radio, Mesh HT SSID
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table 35 Profiles > Mesh > Radio Profile Settings (Continued) Field Default Description 802.11g Transmit Rates All selected Mesh Private VLAN 0 (0-4094) Indicate the transmit rates for the 802.11g radio. The AP attempts to use the highest transmission rate to establish a mesh link. If a rate is unavailable, the AP goes through the list and uses the next highest rate. Enter a VLAN ID for control traffic between an remote mesh portal and mesh nodes. This VLAN ID must not be used for user traffic. Range: 0-4094. Default: 0 (disabled). BC/MC Rate Yes Optimization Enable or disable scanning of all active stations currently associated to a mesh point to select the lowest transmission rate based on the slowest connected mesh child. When enabled, this setting dynamically adjusts the multicast rate to that of the slowest connected mesh child. Multicast frames are not sent if there are no mesh children. NOTE: AirWave recommends using the default value. 3. Select Add or Save. The added or edited Radio profile appears on the Profiles > Mesh > Radio page. Profiles > Mesh > Radio > Mesh HT SSID The mesh high-throughput SSID profile enables or disables high-throughput (802.11n) features for the SSID specified in the profile. This parameter is enabled by default. The mesh high-throughput profile can have a maximum of 32 characters. Perform these steps to configure a Mesh HT SSID profile. 1. Select Profiles > Mesh > Radio > Mesh HT SSID in the Dell PowerConnect W Navigation pane. The details page summarizes the current profiles of this type. 2. Select the Add button to create a new Mesh HT SSID profile, or click the pencil icon next to an existing profile to edit. The Details page appears. Complete the settings as described in Table 17: Table 36 Mesh > Radio > Mesh HT SSID Profile Settings Field Default Description General Settings Folder Top Name Blank Other Settings 40 MHz Channel Usage Max Received A-MPDU Size (bytes) Yes 65535 Min MPCU Start Spacing 8 (uSec) High Throughput Enable Yes (SSID) Set the folder with which the profile is associated. The drop-down menu displays all folders available for association with the profile. Enter the name of the profile. This profile name can have a maximum of 32 characters. Enable or disable the use of 40 MHz channels. This parameter is enabled by default. Set the maximum size of a received aggregate MAC Protocol Data Unit (A-MPDU), in bytes. The allowed values in AOS 3.4 and later are 8191, 16383, 32767, or 65535 bytes. AWMS may support additional options. Set the minimum time between the start of adjacent MPDUs within an aggregate MPDU, in microseconds. The allowed values 0 (No restriction on MDPU start spacing),.25 uSec, .5 uSec, 1 uSec, 2 uSec, 4 uSec, 8 uSec, and 16 uSec. Enable or disable high-throughput (802.11n) features on this SSID. This parameter is enabled by default. 92 | Dell PowerConnect W Configuration Reference Dell PowerConnect W AirWave 7.2 | Configuration Guide