Dell PowerConnect W-Airwave W-Airwave 7.2 Configuration Guide - Page 145
Local Config of SNMP Management, General Settings, SNMP Settings, SNMP Trap Hosts
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Local Config of SNMP Management The Local Config component, introduced in AWMS 7.2, is used for local configuration of Dell PowerConnect W controllers. Locally configured settings are not pushed to local controllers by master controllers. SNMP trap settings for controllers are managed locally. Trap settings for the AP are managed by group or global configuration in Profiles > AP > SNMP. Refer to "Profiles > AP > SNMP" on page 71 if you want to manage AP settings. CAUTION: If you push configuration to a controller without having imported the contents of this profile, it will stop responding to the AMP, because the default profile has no community strings in it. To configure SNMP trap settings on a controller, navigate to the Local Config > SNMP Management page. Select Add to create a new SNMP Management profile, or click the pencil icon to edit an existing profile. Table 73 describes the fields that appear in the Details page for this profile: Table 73 Local Config > SNMP Management Profile Settings Field Description General Settings Folder Name Set the folder with which the profile is associated. The drop-down menu displays all folders available for association with the profile. Enter the name of the profile. SNMP Settings Community Strings Community strings used to authenticate requests for SNMP versions before version 3. NOTE: This is needed only if using SNMP v2c and is not needed if using version 3. Enable Trap Generation Enables generation of SNMP traps to configured SNMP trap receivers. Engine ID Sets the SNMP server engine ID as a hexadecimal number. 24 character maximum. Inform Queue Length (100-350) Specifies the length for the SNMP inform queue. Default is 250. Always use the controller's IP Set whether to use the IP address of the controller as the trap source. address as source address Trap Source IP Address Enter the source IP address for sending traps. SNMP Trap Hosts IP Address SNMP Version Community String UDP Port (1-65535) Enter the IP address of the trap host. Configures the SNMP version as 1, 2c, or 3. If 2c is selected, the Send Inform field appears at the bottom of this section. If 3 is selected, the SNMP User field will appear as a drop-down menu containing any configured v3 users. Select the plus icon to add them via the SNMP Management > SNMPv3 User profile. Configure the security string for notification messages. Does not appear if SNMP Version is set to 3. The port number to which trap notification messages are sent. Default is 162. Dell PowerConnect W AirWave 7.2 | Configuration Guide Dell PowerConnect W Configuration Reference | 145