Dell PowerEdge M520 Dell Converged Enhanced Ethernet Administrator's Guide - Page 48
Display the detailed information about all the IP static routes., command to remove a static ip route.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 Configuring IP static routes 2. Display the detailed information about all the IP static routes. switch>show ip route all Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 10.32.144.1 to network 0.0.0.0 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks S 10.0.0.0/8 [1/0] via 10.32.144.1 C 10.32.144.0/20 is directly connected, GigabitEthernet4/47 S* 0.0.0.0/0 [1/0] via 10.32.144.1 3. Use the clear ip route command to remove a static ip route. switch>clear ip route 10.0.0.0/8 4. Optional: Use the clear ip route command to remove all static ip routes. switch>clear ip route all 30 Dell Converged Enhanced Ethernet Administrator's Guide 53-1002116-01