Dell PowerEdge M520 Dell Converged Enhanced Ethernet Administrator's Guide - Page 81
Disabling spanning tree, command to enable spanning tree on the CEE interface.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Configuring STP, RSTP, or MSTP on CEE interface ports 6 To enable spanning tree on the CEE interface, perform the following steps from Privileged EXEC mode. 1. Enter the configure terminal command to access global configuration mode. 2. Enter the interface command to specify the CEE interface type and slot/port number. switch(config)#interface intengigabitethernet 0/1 3. Enter the no shutdown command to enable the CEE interface. 4. Enter the spanning-tree command to enable spanning tree on the CEE interface. switch(conf-if-te-0/1)#no spanning-tree shutdown Disabling spanning tree From the CEE interface, use this command to disable spanning tree on the CEE interface. By default, spanning tree is disabled. To enable spanning tree on the CEE interface, perform the following steps from Privileged EXEC mode. 1. Enter the configure terminal command to access global configuration mode. 2. Enter the interface command to specify the CEE interface type and slot/port number. switch(config)#interface intengigabitethernet 0/1 3. Enter the no shutdown command to enable the CEE interface. 4. Enter the spanning-tree command to enable spanning tree on the CEE interface. switch(conf-if-te-0/1)#spanning-tree shutdown Dell Converged Enhanced Ethernet Administrator's Guide 63 53-1002116-01