Dell PowerEdge R350 EMC Installation and Service Manual - Page 29
Installing a cooling fan
View all Dell PowerEdge R350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Figure 15. Removing a cooling fan Next steps Replace a fan. Installing a cooling fan Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Lower the cooling fan into the cage until it is seated firmly. 2. Press the release tabs on the fan cable connector and connect the cable to the system board. NOTE: Route the cable properly to prevent the cable from being pinched or crimped. Installing and removing system components 29
Figure 15. Removing a cooling fan
Next steps
Replace a fan
.
Installing a cooling fan
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
Steps
1.
Lower the cooling fan into the cage until it is seated firmly.
2.
Press the release tabs on the fan cable connector and connect the cable to the system board.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
Installing and removing system components
29