Dell PowerEdge R350 EMC Installation and Service Manual - Page 63
Removing the BOSS S2 module, Installing the BOSS S2 module
View all Dell PowerEdge R350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Figure 55. Removing the BOSS S2 module Next steps 1. Replace the BOSS S2 module. Installing the BOSS S2 module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. If required, remove the air shroud. Steps 1. Install the BOSS S2 module into the BOSS module cage. 2. Using the Phillips #1 screwdriver, secure the BOSS S2 module on the BOSS module bay with the two screws. Figure 56. Installing the BOSS S2 module Installing and removing system components 63
Figure 55. Removing the BOSS S2 module
Next steps
1.
Replace the BOSS S2 module
.
Installing the BOSS S2 module
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
If required,
remove the air shroud
.
Steps
1.
Install the BOSS S2 module into the BOSS module cage.
2.
Using the Phillips #1 screwdriver, secure the BOSS S2 module on the BOSS module bay with the two screws.
Figure 56. Installing the BOSS S2 module
Installing and removing system components
63