Dell PowerEdge R350 EMC Installation and Service Manual - Page 78
Installing the IDSDM module, Removing the IDSDM module
![]() |
View all Dell PowerEdge R350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Figure 73. Removing the IDSDM module Next steps Replace the IDSDM module. Installing the IDSDM module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Locate the IDSDM connector on the system board. To locate IDSDM, see the System board jumpers and connectors section. 2. Align IDSDM module with the connector on the system board. 3. Press the IDSDM module, until firmly seated on the system board connector. 78 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r350-emc-installation-service-manual-08c4fef/78.png)
Figure 73. Removing the IDSDM module
Next steps
Replace the IDSDM module
.
Installing the IDSDM module
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
Steps
1.
Locate the IDSDM connector on the system board.
To locate IDSDM, see the
System board jumpers and connectors
section.
2.
Align IDSDM module with the connector on the system board.
3.
Press the IDSDM module, until firmly seated on the system board connector.
78
Installing and removing system components