Dell PowerEdge R740xd2 EMC Installation and Service Manual - Page 146
Initializing TPM for BitLocker users, Initializing the TPM 1.2 for TXT users, Initializing the TPM 2
View all Dell PowerEdge R740xd2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Next steps 1. If removed, install the risers. 2. If removed, install the rear drive cage. 3. Install the air shroud. 4. Install the system cover. 5. Place the system into the rack. For more information, see the Rail Installation Guide available at www.dell.com/poweredgemanuals. 6. Open the drive bays, install all drives, and then close the drive bays. 7. Install the power supply units. 8. Follow the procedure listed in After working inside your system. Initializing TPM for BitLocker users Steps Initialize the TPM. For more information, see https://technet.microsoft.com/en-us/library/cc753140.aspx. The TPM Status changes to Enabled, Activated. Initializing the TPM 1.2 for TXT users Steps 1. While booting your system, press F2 to enter System Setup. 2. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 3. From the TPM Security option, select On with Pre-boot Measurements. 4. From the TPM Command option, select Activate. 5. Save the settings. 6. Restart your system. 7. Enter System Setup again. 8. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 9. From the Intel TXT option, select On. Initializing the TPM 2.0 for TXT users Steps 1. While booting your system, press F2 to enter System Setup. 2. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 3. From the TPM Security option, select On. 4. Save the settings. 5. Restart your system. 6. Enter System Setup again. 7. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 8. Select the TPM Advanced Settings option. 9. From the TPM2 Algorithm Selection option, select SHA256, then go back to System Security Settings screen. 10. On the System Security Settings screen, from the Intel TXT option, select On. 11. Save the settings. 12. Restart your system. 146 Installing and removing system components