Dell PowerEdge R740xd2 EMC Installation and Service Manual - Page 80
Installing bay intrusion switch
![]() |
View all Dell PowerEdge R740xd2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Figure 55. Removing the bay intrusion switch Next steps Replace the bay intrusion switch. Installing bay intrusion switch Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. If installed, remove the front bezel. 4. Open the drive bays. 5. Remove the drive bay 1 bracket. Steps 1. Align the intrusion switch to the intrusion switch slot in drive bay 1. 2. Using a Phillips #1 screwdriver, replace the screws to secure the intrusion switch. 3. Connect the intrusion cable to the backplane of drive bay 1. 80 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r740xd2-emc-installation-service-manual-0ea2282/80.png)
Figure 55. Removing the bay intrusion switch
Next steps
Replace the bay intrusion switch
.
Installing bay intrusion switch
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
If installed,
remove the front bezel
.
4.
Open the drive bays.
5.
Remove the drive bay 1 bracket.
Steps
1.
Align the intrusion switch to the intrusion switch slot in drive bay 1.
2.
Using a Phillips #1 screwdriver, replace the screws to secure the intrusion switch.
3.
Connect the intrusion cable to the backplane of drive bay 1.
80
Installing and removing system components