Dell PowerEdge T620 Owner's Manual - Page 39
Opening The System, Opening and Closing the System - tower
View all Dell PowerEdge T620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Opening The System CAUTION: Installing the feet on a stand-alone tower system is necessary to provide a stable foundation for the system. Failure to install the feet poses the risk of having the system tip over, possibly causing bodily injury or damage to the system. NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system. 1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2. Rotate the latch release lock counter clockwise to the unlocked position. 3. Press down on the cover release latch and rotate the latch end of the cover away from the system. 4. Grasp the cover on both sides, and carefully move the cover away from the system. Figure 11. Opening and Closing the System 1. system 2. system side cover 3. cover release latch 4. latch release lock Closing The System 1. Place the bottom edge of the cover, opposite from the cover release latch, into the slots in the system chassis. 2. Lower the cover into the chassis. 3. Press the latch end of the cover into the chassis until the latch locks into place. 39