Dell PowerEdge T640 EMC PowerEdge T640 Installation and Service Manual - Page 107
NVDIMM-N battery, Removing the NVDIMM-N battery
![]() |
View all Dell PowerEdge T640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Next steps 1. Install the optical drive cage. 2. Follow the procedure listed in After working inside your system on page 66. NVDIMM-N battery Removing the NVDIMM-N battery Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 65. 2. Follow the procedure listed in Before working inside your system on page 66. CAUTION: To prevent data loss, ensure that your system is turned off and that the indicator LEDs on the battery are Off before removing the NVDIMM-N battery. CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 3. Remove the NVDIMM-N battery cage. Steps 1. Disconnect the cables from the NVDIMM-N battery. 2. Using the Phillips #2 screwdriver, loosen the screw securing the NVDIMM-N battery. 3. Holding the edges, lift the battery from the NVDIMM-N battery cage. Figure 65. Removing the NVDIMM-N battery Next steps 1. Install the NVDIMM-N battery. Installing and removing system components 107
![](/manual_guide/products/dell-poweredge-t640-emc-poweredge-t640-installation-service-manual-271650b/107.png)