Dell PowerEdge T640 EMC PowerEdge T640 Installation and Service Manual - Page 14
System health and system ID indicator codes
View all Dell PowerEdge T640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Table 3. iDRAC Quick Sync 2 indicators and descriptions iDRAC Quick Sync 2 indicator code Off (default state) Solid white Blinks white rapidly Condition Corrective action Indicates that the iDRAC Quick Sync 2 feature is turned off. Press the iDRAC Quick Sync 2 button to turn on the iDRAC Quick Sync 2 feature. Indicates that iDRAC Quick Sync 2 is ready to communicate. Press the iDRAC Quick Sync 2 button to turn off. Indicates data transfer activity. If the LED fails to turn on, reseat the cable and check. If the problem persists, see the Getting help section. If the LED fails to turn off, restart the system. If the problem persists, see the Getting help section. If the indicator continues to blink indefinitely, see the Getting help section. Blinks white slowly Indicates that firmware update is in progress. If the indicator continues to blink indefinitely, see the Getting help section. Blinks white five times rapidly and Indicates that the iDRAC Quick Sync 2 then turns off feature is disabled. Solid amber Blinking amber Indicates that the system is in fail-safe mode. Indicates that the iDRAC Quick Sync 2 hardware is not responding properly. Check if iDRAC Quick Sync 2 feature is configured to be disabled by iDRAC. If the problem persists, see the Getting help section. For more information, see www.dell.com/idracmanuals www.dell.com/ operatingsystemmanuals. Restart the system. If the problem persists, see the Getting help section. Restart the system. If the problem persists, see the Getting help section. System health and system ID indicator codes The system health and system ID indicator is located on the front panel of your system. Figure 7. System health and system ID indicators Table 4. System health and system ID indicator codes System health and system ID indicator code Condition Solid blue Indicates that the system is turned on, system is healthy, and system ID mode is not active. Press the system health and system ID button to switch to system ID mode. Blinking blue Indicates that the system ID mode is active. Press the system health and system ID button to switch to system health mode. Solid amber Indicates that the system is in fail-safe mode. If the problem persists, see the Getting help section. Blinking amber Indicates that the system is experiencing a fault. Check the System Event Log for specific error messages. For information about the event and error messages generated by the system firmware and agents that monitor system components, go to qrl.dell.com > Look Up > Error Code, type the error code, and then click Look it up.. 14 Dell EMC PowerEdge T640 overview