Dell PowerEdge T640 EMC PowerEdge T640 Installation and Service Manual - Page 79
Removing a 2.5 inch drive from a 3.5 inch drive adapter
![]() |
View all Dell PowerEdge T640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 38. Installing a 3.5 inch drive adapter into the 3.5 inch drive carrier Next steps 1. Install the drive carrier. 2. If removed, install the front bezel. Removing a 2.5 inch drive from a 3.5 inch drive adapter Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 65. 2. Remove the 3.5 inch drive adapter from the 3.5 inch drive carrier. NOTE: A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5 inch drive carrier. Steps 1. Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5 inch drive adapter. 2. Remove the 2.5 inch drive from the 3.5 inch drive adapter. Installing and removing system components 79
![](/manual_guide/products/dell-poweredge-t640-emc-poweredge-t640-installation-service-manual-271650b/79.png)
Figure 38. Installing a 3.5 inch drive adapter into the 3.5 inch drive carrier
Next steps
1.
Install the drive carrier
.
2.
If removed,
install the front bezel
.
Removing a 2.5 inch drive from a 3.5 inch drive adapter
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 65.
2.
Remove the 3.5 inch drive adapter from the 3.5 inch drive carrier
.
NOTE:
A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5 inch drive carrier.
Steps
1.
Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5 inch drive adapter.
2.
Remove the 2.5 inch drive from the 3.5 inch drive adapter.
Installing and removing system components
79