Dell PowerEdge T640 EMC PowerEdge T640 Installation and Service Manual - Page 132
M.2 SSD module, Removing the M.2 SSD module
View all Dell PowerEdge T640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
M.2 SSD module Removing the M.2 SSD module Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 65. 2. Follow the procedure listed in Before working inside your system on page 66. 3. Remove the air shroud. 4. Remove the BOSS card. NOTE: Removing the BOSS card is similar to the procedure for removing an expansion card riser. Steps 1. Loosen the screws and lift the retention straps that secure the M.2 SSD module on the BOSS card. 2. Pull the M.2 SSD module away from the BOSS card. Figure 85. Removing the M.2 SSD module Next steps 1. Install the M.2 SSD module. Installing the M.2 SSD module Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 65. Steps 1. Align the M.2 SSD module connectors with the connectors on the BOSS card. 2. Push the M.2 SSD module until the module is seated firmly on the BOSS card. 3. Secure the M.2 SSD module on the BOSS card with the retention straps and screws. 132 Installing and removing system components