Dell PowerEdge T640 EMC PowerEdge T640 Installation and Service Manual - Page 119
Installing the processor into a processor and heat sink module
![]() |
View all Dell PowerEdge T640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Figure 72. Removing the processor bracket Next steps 1. Install the processor into the processor and heat sink module. Installing the processor into a processor and heat sink module Prerequisites Follow the safety guidelines listed in Safety instructions on page 65. Steps 1. Place the processor in the processor tray. NOTE: Ensure that the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor. 2. Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket. NOTE: Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing the bracket on the processor. NOTE: Ensure that the processor and the bracket are placed in the tray before you install the heat sink. Installing and removing system components 119
![](/manual_guide/products/dell-poweredge-t640-emc-poweredge-t640-installation-service-manual-271650b/119.png)