Dell PowerEdge T640 EMC PowerEdge T640 Installation and Service Manual - Page 92

Installing the air shroud

Get Dell PowerEdge T640 PDF manuals and user guides View all Dell PowerEdge T640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

Figure 49. Removing the air shroud Next steps 1. Install the air shroud. Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 65. 2. If applicable, route the cables inside the system along the chassis wall and secure the cables by using the cable-securing bracket. Steps 1. Align the tabs on the air shroud with the securing slots on the chassis. a. Guide on the air shroud with the guide pin on the system board. b. Align the intrusion switch with the intrusion switch connector on the system board. 2. Lower the air shroud into the chassis until it is firmly seated. When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets. 3. NOTE: The procedure to install the cooling fan into the air shroud is similar to installing a cooling fan. If removed, install the fans into the air shroud. 92 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
Figure 49. Removing the air shroud
Next steps
1.
Install the air shroud
.
Installing the air shroud
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 65.
2.
If applicable, route the cables inside the system along the chassis wall and secure the cables by using the cable-securing bracket.
Steps
1.
Align the tabs on the air shroud with the securing slots on the chassis.
a.
Guide on the air shroud with the guide pin on the system board.
b.
Align the intrusion switch with the intrusion switch connector on the system board.
2.
Lower the air shroud into the chassis until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.
3.
NOTE:
The procedure to install the cooling fan into the air shroud is similar to installing a cooling fan.
If removed,
install the fans into the air shroud
.
92
Installing and removing system components