Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 18
Table 5. PowerStore T model Network Setup Preparation Worksheet example continued, VLT domain ID 1
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 5. PowerStore T model Network Setup Preparation Worksheet (example) (continued) Step Step details Notes Management IP address for switch 1 100.0.100.10/24 Management IP address for switch 2 100.0.100.11/24 Default gateway 100.0.100.1 NTP server 100.0.100.200 10. Dell EMC supports deploying PowerStore T model with two Top-of-Rack (ToR) switches with a layer 2 interconnect link. Choose which type of layer 2 interconnect you will use: Highly Recommended: Multi-chassis Link Aggregation Group (MC-LAG) If you will be using MC-LAG, record the ports you will use to connect the switches together. Switch to switch port pair 1 25 to 25 Switch to switch port pair 2 26 to 26 Alternative to MC-LAG: Reliable L2 uplinks N/A 11. If using MC-LAG, enter the Domain ID. VLT domain ID 1 12. If using VLT for the Layer 2 interconnect, record the: VLT MAC address to use for both switch 1 and switch 2. Use the same VLT MAC address for switch 1 and switch 2. 00:00:00:00:00:01 NOTE: You cannot use all zeros (00:00:00:00:00) for the VLT MAC address. VLT priority for switch 1 1 VLT priority for switch 2 8192 13. If configuring with Link Aggregation Control Protocol (LACP) record the LACP (port channel) ID for the node connections: Port Channel ID for Node A port channel 10 Port Channel ID for Node B port channel 20 14. Record the ports on the ToR switches that will be used to connect to the uplinks. Uplink A to ToR 1 port 29 Uplink B to ToR 1 port 30 Uplink A to ToR 2 port 29 Uplink B to ToR 2 port 30 15. Record the port channel ID using for connectivity between the ToR switches and the uplinks. If deploying with MC-LAG, enter the port channel ID used port channel 30 for the uplink. Only a single port channel ID is required for MC-LAG. Alternatively, record the uplink port channel IDs required for Reliable L2. Reliable L2 connectivity requires two port channel IDs. 1. Port channel ID for Reliable L2 2. Port channel ID for Reliable L2 N/A N/A 18 PowerStore T model: Before you begin