Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 51
Con PowerStore X model network VLANs on the switch
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
9. Configure the spanning tree priority on the switch. spanning-tree rstp priority 40960 Note the following when selecting spanning-tree rstp priority values: ● It is important that you work with your network administrator to determine which value to use to avoid conflicts with other switches in your network. ● Different rstp priority values should be used when configuring switch 1 and switch 2. ● 0 priority is typically reserved for the root bridge. 10. Repeat the above steps for the second switch (Switch2). Code samples for configuring general settings on the ToR switches Switch1 Switch2 configure terminal hostname Switch1 interface ethernet 1/1/13 description discoveryWorkstation switchport access vlan 1 no shutdown interface mgmt 1/1/1 no shutdown no ip address dhcp ip address 100.0.100.10/24 exit management route 0.0.0.0/0 100.0.100.1 ntp server 10.0.0.200 spanning-tree mode rstp spanning-tree rstp priority [40960} exit configure terminal hostname Switch2 interface mgmt 1/1/1 no shutdown no ip address dhcp ip address 100.0.100.11/24 exit management route 0.0.0.0/0 100.0.100.1 ntp server 100.0.1000.200 spanning-tree mode rstp spanning-tree rstp priority [45056] exit Configure PowerStore X model network VLANs on the switch About this task Configure the PowerStore X model on the switch. PowerStore X model: Configure switches 51