Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 92
Table 27. PowerStore X model Network Setup Preparation Worksheet blank continued
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table 27. PowerStore X model Network Setup Preparation Worksheet (blank) (continued) Step Step details Notes Node A, Port 1 to Node B, Port 0 to Node B, Port 1 to 4. Record the switch port to use for discovery while configuring your switches. 5. Record the VLAN IDs that will be used for system management: Remote Discovery (untagged) Management (tagged) 6. Record the VLAN IDs that will be used for production: Storage network (tagged) vMotion (tagged) Internal (untagged) 7. Reserve and record the IP addresses necessary to configure the switch below: Management IP address for switch 1 Management IP address for switch 2 Default gateway NTP server 8. Dell EMC supports deploying PowerStore X model with two Top-of-Rack (ToR) switches with a layer 2 interconnect link. Choose which type of layer 2 interconnect you will use: Highly Recommended: Multi-chassis Link Aggregation Group (MC-LAG) If you will be using MC-LAG, record the ports you will use to connect the switches together. Switch to switch port pair 1 Switch to switch port pair 2 Alternative to MC-LAG: Reliable L2 uplinks 9. If using MC-LAG, enter the Domain ID. 10 If using VLT for the Layer 2 interconnect, record the: VLT MAC address to use for both switch 1 and switch 2. Use the same VLT MAC address for switch 1 and switch 2. NOTE: You cannot use all zeros (00:00:00:00:00) for the VLT MAC address. VLT priority for switch 1 VLT priority for switch 2 11. Record the ports on the ToR switches that will be used to connect to the uplinks. Uplink A to ToR 1 Uplink B to ToR 1 Uplink A to ToR 2 Uplink B to ToR 2 92 Network Setup Preparation Worksheets